Part 1
Preliminary Design - Technical and Economic Feasibility

Chapter 1 The Design Problem
1.1 Initial Considerations and Specifications
1.2 Defining the problem and Background Information
	1.2.1 Introduction
	1.2.2 Properties and Uses
	1.2.3 Evolutions of production processes

Chapter 2 Feasability Study and Literature Survey
2.1 Initial Feasibility Study
	2.1.1 Introduction
	2.1.2 The Domestic Scene
	2.1.3 The Global Market
	2.1.4 Market Analysis Discussion
	2.1.5 Market Assessment Conclusions
2.2 Literature Survey
	2.2.1 Introduction
	2.2.2 General Information
	2.2.3 Process Technology
	2.2.4 Cost Estimation
	2.2.5 Market Data
	2.2.6 Thermodynamic Data

Chapter 3 Process Selection
3.1 Process Selection - considerations
	3.1.1 Introduction
	3.1.2 Process Comparison
	      Factors favoring each process
	3.1.3 Process Selection Conclusions

Chapter 4 Process Description and Equipment List
4.1 Process Description Summary
	4.1.1 Introduction
	4.1.2 The Process
	4.1.3 Requirements of Major Process Units
	4.1.4 Mechanical Design Features of Major Units
	4.1.5 Process Flow Diagram
	4.1.6 Process Performance Assessment

Chapter 5 Site Considerations
5.1 Site Selection 
5.2 Plant Layout
5.3 Environmental Impact Analysis
	5.3.1 General Considerations
	5.3.2 EIA Policy and Scope
	5.3.3 EIA Reports

Chapter 6 Economic Evaluation
6.1 Introductory Notes
6.2 Capital Cost Estimation
	6.2.1 Costs
        	6.2.1.1 Cost of Equipment
		6.2.1.2 Module Costs
		6.2.1.3 Auxiliary Costs
	6.2.2 Methods
		6.2.2.1 The Ratio Method
		6.2.2.2 The Factorial Method
	6.2.3 Capital Cost Conclusions
6.3 Operating Costs
6.4 Profitability Analysis - Investment Return

Chapter 7 Mass and Energy Balances
7.1 Preparation of Mass and Energy Balances
	7.1.1 Overall Process Mass Balance
	7.1.2 Unit Mass and Energy Balances
7.2 Preliminary Equipment Design
7.3 Computer-Aided Design

Part II Detailed Equipment Design

Chapter 8 The Detailed Design Stage
8.1 Detailed Equipment Design
	8.1.1 Equipment Design - HELP!
8.2 Additional Design Considerations
	8.2.1 Energy Conservation
	8.2.2 Process Control and Instrumentation
	8.2.3 Safety and Loss prevention

This outline is the Table of Contents for the book:
Ray, Martin and Johnston, David. Chemical Engineering Design Project: A Case Study Approach. New York: Gordon and Breach, 1989.