Breadcrumbs

Scanning Material for E-Reserves

Scanning Material for E-Reserves

In Adobe

    1. Open Adobe Acrobat.
    2. Place document on scanning bed or insert up to 50 pages in automatic document feeder (ADF).
    3. Once Adobe is open, select Create from the toolbar => select PDF from Scanner => select desired mode (i.e. Black & White Document). 
    4. Scanning will begin immediately.
    5. After each scan (if using the flatbed) or after all pages are scanned (if using ADF), a box will appear asking if Scanning is Complete or Scan More Pages.  If scanning additional pages, place documents on flatbed or ADF before selecting Scan More Pages.  When finished, select Scanning is Complete
    6. Check to make sure that all pages have scanned correctly and that they are legible.  Crop pages to remove dark margins in photocopies as needed.
    7. You must save all documents in the Access shared drive under reserves.  Select File => Select Save As => Select correct class folder for the correct quarter or create new folder as needed => Type file name => Select Save.   

     

In Millennium

  1. Create a bibliogrpahic-item following procedures for Keying a Bibliographic Item Record - Electronic Copy Only

  2. In the bib/item record you created, select Media from the upper-right screen.  This is the icon with four blue diamonds.

  3. The Media Manager window will appear. 
      • If no scanned articles have been attached to the item, a window on the right half of the screen will appear, with the Add Media Set box in the upper-left corner.
      • If there are scanned articles attached to the item, the Media Set Description window will appear.  To add a media set/article in this mode, click on Media Manager in the left side of the screen (an icon with a blue file folder).
  1. Click on Add Media Set.  The Media Set Description window will appear with default settings.  

  2. In the Media Set Description window, change the title of the article as appropriate.  For Example:  HOMEWORK #1


  3. Leave all other settings at 000 (publisher code) or $0.00.

  4. When the settings are correct, select Import File from the bottom of the screen.  Search for the file in the Open box, and click Open after selecting the file.  This will attach the scanned article/PDF file to the item record.  If you cannot locate the file, try saving it to your desktop and repeat as above.

  5. When finished, select Save (the icon with a floppy disk) from the top of the screen.

  6. Select Close to finish.

 

In Reserves Database

  1. If the item is Electronic Copy Only or the materials were uploaded to the database by the professor/TA, please refer to “Procedures for E-Reserve Requests.”

  2. Select the appropriate quarter from the drop-down box and click View Requests.

  3. Click on Manage Photocopy Reserve Requests, then click on Edit Request next to the appropriate item.

  4. Change the status to Completed in the drop-down box marked Status.

  5. In the Requests Notes section, type “Processed.-12/1/07 (cr)” to indicate that you have completed processing for the item.

     
  6. When finished, click Update.
  7. Mark statistics as appropriate.  For Rivera E-Reserves, open the "E-Reserves statistics" excel file in the reserves shared drive for the current month.  Add the article title, course, and number of pages scanned.  Enter "0" if the file was uploaded electronically. 
Last modified: 9/6/2013 9:49 AM by S. Klawitter

General Campus Information

University of California, Riverside
900 University Ave.
Riverside, CA 92521
Tel: (951) 827-1012
UCR Career Opportunities
Library Job Opportunities

UCR Libraries Information

Directions / Mailing Addresses
Tomás Rivera Library: (951) 827-3220
Orbach Science Library: (951) 827-3701
Music Library: (951) 827- 3137
Multimedia Library: (951) 827-5606
UCR Libraries Visitor Guide

Related Links

Footer

UCR Libraries Facebook UCR Libraries Twitter UCR Libraries YouTube UCR Libraries News UCR Libraries Mobile Website